Magic Mesh
Magic Mesh cases and mounts
Our cases for your own Heltec V4 board, and mounts for the car. Printed in ABS or ASA, never PLA.
The same cases our Magic Mesh radios ship in, sold on their own: put your V4 board in a case built to be carried and used, not just to cover it. And the cup holder mounts that keep a handheld or a Console in reach on the road.
Printed in ABS or ASA, never PLA
Most printed cases are PLA. PLA starts to soften around 60 °C, and a closed car in summer gets hotter than that. It also goes brittle in the sun.
ABS
Holds its shape to about 100 °C. Tough, and right for a case that lives in a car or a pocket.
ASA
As tough as ABS and made to stand the sun, so it does not fade or go chalky outdoors.
Launch priceMagic Mesh handheld case
$34.99$19.99Our own handheld case for the Heltec V4 board, in two shapes: the Pebble, the smaller one, or the Shard, the first and taller one. Room for the battery and the GPS module, the Magic Mesh mark and lettering set into the face in a second colour, a real button, a framed screen window, a carabiner loop and a proper SMA antenna socket. Pick the shape, the body colour and the lettering colour.
In the box: Front and back, battery keeper, button cap, and every screw and nut it takes. Board, battery, antenna and GPS module not included.
Shape
Body colour · Black
Lettering colour · Yellow
Launch priceMagic Mesh Console case
$39.99$19.99The desk station's case for the Heltec V4 board: a low wedge with the screen on the slope and the button under it, a battery bay for a 3000 mAh battery, the antenna socket at the back and a notch for a fitted power cable.
In the box: Top, bottom plate, battery keeper, board strap, button cap, and every screw it takes. Board, battery, antenna and cable not included.
Body colour · Black
Lettering colour · Yellow
Console car mount
$24.99The Console in a cup holder. Drop the plug in and turn the thumb wheel: three pads press out against the cup holder's wall and hold it fast. Turn it back and it lifts out. The Console clips into the tray and lifts straight off, and the tray turns in 15 degree steps toward the driver. Fits Consoles with the clip slots (from October 15, 2026).
In the box: The plug (body, post, three pads, floor disc, thumb wheel and cap), the tray, and the four screws it takes.
Handheld car cradle
$24.99The Magic Mesh handheld in a cup holder, on the same plug as the Console mount: turn the thumb wheel and its pads hold it fast. The handheld drops in from above and leans back so you can read the screen, with room under it for a USB-C cable to keep it charged.
In the box: The plug (body, post, three pads, floor disc, thumb wheel and cap), the cradle, and the four screws it takes. The cradle is made for the Shard.
Pick what you want above
Printed to order and shipped within about a week. Free USPS shipping in the US, or Priority Mail for $9.95 at checkout. You sign in to Magic PTT first so the order lands on your account.
All sales are final. If your radio arrives dead, tell us within 30 days and return it to us; the return postage is yours. We examine it when it arrives and send a replacement. Drops, water and wear are not covered.